Sunday, August 19, 2012

Rotor Hub Review: Alternate Approach Needed? : Schoffmann Home built

There are a few people out there attempting to build their own "Garage Helicopters" and it's good to see all of the creative people working on innovative designs.
One concern that caught my eye is the rigid configuration of the Ivoprop style blade: should it have lead/lag and flapping hinges. If so, given that it is not a rotor blade regarding the rotor chord width and span, would flapping hinges cause too much blade coning and lose lift? It's an intriguing platform.

I decided to attempt to design a rotor head that would allow a small amount of flapping action & lead/lag, but without adding excessive weight.
WARNING: Do not attempt to use the following sketches herein on a manned platform. UAS/UAV will require testing. Considerations need to be addressed when scaling up. You are responsible for your on actions and any damage or injuries that may result in not following sound design and fabrication processes. Flying any aircraft, manned or unmanned, can result in injury or death to you and/or others. You are legally, financially, & medically responsible for you on actions. This rotor hub may be sound for /UAVUAS. Keep in mind that allowing the hub to flex/flap in this design will require more distance bewteen the lower and upper hubs when utilized in a UAV/UAS platform if you intend to use the def gear assembly between the hubs to attain counter rotation. Personally I like the idea of two rotor shafts.



This video is the reason for my concern for not having flapping hinges for dealing with dissymmetry of lift. Not a Schoffmann helicopter.


Human Interface Rotor Systems and Morphing Airframes

I wanted to share a few words regarding my interest in HMI (Human Machine Interface). My goal is practical application, so if you're a dooms day follower...sorry I let you down. The human interface software that interests me is none invasive and the idea is to aid operation rather "turn it loose" on it's own and see what happens. Regarding my helicopter designs, for example, should a pilot pass out, the system would notice the unwanted changes in flight control input. I always want a "human in the loop". The only "invasive human interface I think would be ok is that regarding amputees or paralyzed people. They're doing wonderful work to that end and even National Geographic did an article on it.


This effort is not an attempt to replace any UAS. It is simply an update on my approach/effort to civil UAS and manned platforms. I am still not funded by the Army regarding my patent (Pat # 8,226,026 B2) nor is my endeavor to get the platform off of paper and into the air. But, I'm still going to keep "plugging" away on my own. The designs that I've given to the Army/DOD are separate. Further I have nothing to do with any military rotorcraft/aerospace programs outside of the designs that were given.
I finally made head way in getting the 2nd coaxial HIR prototype into the air with fairly good control for the first hop flight. No swash plate.
Some of you may be thinking it resembles the Japanese GEN H4 or the Airscooter coaxial systems, but those respective airframes, though innovative, are simply tilt mast and both airframes are fixed pitch. Now, my small scale coaxial is also fixed pitch, but it's not simply "tilt mast". It is two airframes that are interconnected with the upper airframe containing the rotor system, tilting independently from the lower airframe, thereby allowing for the application of full collective pitch and yet the weight remains equally distributed between both airframes. If the upper airframe tilts forward, the rotor thrust is vectored as well as the lower portion of the upper airframe that interconnects with the lower airframe via a longitudinal lever/airframe strut, moves aft, but at equal moments, "flexing" the CG rather than a lateral or linear shift in weight within the airframe. A sort of "pendulum" flex, if you will. My theory.

If you review the video clips of the GEN H4 flying, the operator appears to have a "cautious" hold on the control stick that tilts the power plants and masts, but it appears too "loose" as if it may be more easily to over correct, but I cannot be certain. It appears not to be intuitive. With "planform" morphing/HIR airframes, the control stick manipulates both airframes, but not in a "stick to the rotor discs" manner. Connecting the weight of both airframes together, to include the pilot weight in a manned platform, adjusts the the attitude of the upper airframe/masts for direction control. Should any atmospheric gusts hit the rotor discs, it will be translated into both airframes, pilot weight, and then to the control stick. That translation from the rotor discs is "buffered". Further, there may be better control feedback to the operator. With the GEN H4, an atmospheric gust would seem to translate straight to the control stick as the rotor masts/power plants ride on a single gimbal. My platform will use a gimbal as well, but there are always two attachment points between the two airframes with the control stick controlling movement between the two. The GEN H4 has one attachment point between the rotor discs and lower airframe. Two if you count the pilot's hand on the control stick. Now, I need to get the 1st single mast prototype flying. The airscooter again is fixed pitch. Further, it utilizes both a dif. gear system and a polychain pulley system.
Later this week, I will move outdoors and attempt maneuvering around obstacles. Last year, my original plan was to include some sort of "SMART" software that will assist in keeping the airframe in the most optimal configuration for translational flight. If you can remember learning to ride a bicycle and Mom or Dad kept their hand on the seat as you peddled away until you internalized the balance required and then they would let go of the seat. SMART software that can sense pilot control inputs and then make a decision of whether or not to adjust stick control input or take over. But, as of right now, my airframe is only a physical human interface regarding the weight of the pilot moving, interacting and assisting the airframe configuration in control of the platform/thrust vectoring during flight. Time will tell.


Outdoor Flight

I'm still not satisfied. Made some changes, 180 degree flip on the forward/aft servo, but no a cherping has developed, causing inconsistent rpms and excessive yaw that neither the trim tab or yaw control surface can counter. The concept works, so I'm scaling up to gas powered. I have a 54 cc chain saw engine and I intend to use a go pro camera.



Airframe hit the ground from 15 feet....airframe was more rugged than I had expected. The combination adhesive with carbon fiber gusset plates was a good choice on my part. The battery/yaw control platform broke free. It still flew, but lost forward/aft control which I expected. Regarding planform morphing airframes, if there are not 2 points of connection with the weight equally distributed between both airframes, allowing both airframes to move within "one another" the lower airframe will act like a clock pendulum. I suppose my theory proved right.




 
Airframe detail below

http://www.youtube.com/watch?v=PKixR_89BQg




Sunday, August 12, 2012

Finally got the 2nd prototype helicopter of my patent up and flying; no swashplate; planform morphing airframe rotor disc control. I still need to tweak the yaw control and increase the surface area of the yaw paddle. I added a small washer w/ some teflon grease between the reduction gears, but it may be causing a little friction, slowing one of the mast down and causing excessive yaw, but it can be negated with additional yaw control input to counter it. More tweaking and I can move outdoors now. Now to get the boom and pod single mast platform flying.


Friday, August 10, 2012

Coaxial Prototype of HIR

The 2nd coaxial prototype of my patent flew, but the CG is off. It drifts aft and to the left. Further I need to cut some weight on the airframe.http://www.youtube.com/watch?v=gzYRF9xLs9s

Sunday, July 15, 2012

Rotor Hub Review: Sikorsky S 34

Also known as the "H34 Choctaw" within military ranks, this helicopter has an interesting rotor hub assembly. Originally it had a large radial engine, but I have seen a few that have been brought to life and uses a turbine power plant.  The lead/lag axis utilizes a heavy hinges with vertical trunnions. Usual lead/lag hinges that I've seen are at the blade root or some type of flex beam inside of a couple of torsion bars combining lead/lag with flapping as seen in the Twin Star. But, I'm not an expert. Just thought it was an interesting set up.




RC Helo Review: Air Recon

My Step daughter Amy, got me this Air Recon indoor helicopter for Father's Day, made by Propel RC. Though the small platform costs a few "bags of nickels", the pay off is what it has to offer and that would be digital video as well as still photos. The still photos are a bit blurred, but let's face it, it's mounted on something that flies. The digital video feed is surprisingly clear, though it does not have a sound feed. It's a smooth operating little rotorcraft with very responsive control though it does not have a swash plate. Froward/Aft pitch is controlled by the small horizontal tall rotor that applies vertical lift upwards and down. Yaw control is governed by changing the RPM of one of the rotor discs. It's also a rugged bird as I have crashed it a number of times over the 4th of July weekend. I did manage to break the tail rotor when it hit my wife's mini-blinds, separating one of the tiny wires, but I managed to replace the motor. Now for those who do not tinker on their own, I would suggest buying parts made for the air recon helo. I usually do my own thing and bought a similar motor from the local hobby store. I re-ran the wiring to the new motor, splicing the ends with a good "bread tie" twist and used an flexible adhesive to protect the exposed wire rather than soldering the ends. The draw back to my replacement motor is that is was a bit longer, though the voltage was ok.  It did change the center of gravity causing the helo to drift aft a bit, but I leveled the CG out by gluing a small machine nut to the nose. It reduced the run time a bit, but I enjoy the tinkering and process of problem solving. Video and pics are stored on a removable micro SD card that can be removed and place in the flash drive adapter to down load to your PC. All of the above mentions hardware comes with the helo. Charging the helo can be done from the transmitter as well as a USB slave cable that enables you to charge the helo from your PC. Over all not a bad package. The only draw back.....it's IR signal and not radio, so it can only be flown indoors because the sun screws up the IR signals.
The other airframes are coming along, but electrical issues I found to be faulty manufacturing.